5.
What action should you take when the red indicator stem on the fire extinguisher pops up?
A.
Notify organizational maintenance.
B.
Replace the fire extinguisher seal.
C.
Push the stem back in.
D.
Adjust the fire extinguisher pressure valve.
6.
During normal operation, what is the maximum time the fuel, engine, or fog oil switches may be
held in the START position before damage occurs?
A.
10 seconds
B.
15 seconds
C.
30 seconds
D.
45 seconds
7.
What must be done immediately after removing an engine head from a hot generator?
A.
Purge the engine.
B.
Adjust the fog oil flow control knob.
C.
Repair the engine head assembly.
D.
Replace it with another engine head.
8.
If you do not know the proper setting of the fog oil flow control knob for normal operating
temperature and maximum smoke output, on what setting should you place the knob?
A.
3
B.
5
C.
7
D.
10
9.
What is the normal operating temperature of the M157 Smoke Generator System?
A.
200 F to 450 F
B.
350 F to 650 F
C.
500 F to 800 F
D.
650 F to 950 F
10.
During operation in extreme cold, how is starting fluid (ether) substituted for Type 2 automotive
combat gasoline?
A.
It is mixed with regular fuel in fuel cans.
B.
It is sprayed into the nozzle when the engine switch is in the START position.
C.
It is mixed with air in the air-tank.
D.
It is blended with fog oil in the fog oil tank.
3-17
CM3305