Lesson 1/Learning Event 1
The tank-unit assembly and personnel shower assembly consist of the tank,
suction hose, foot valve, blender hose, tank-drain valve, hopper-blender
assembly, and personnel shower. Four clevises and lifting eyes are provided
for picking up the tank-unit assembly.
M2 Water Heater
The M2 Water Heater is used to heat water for equipment decontamination
operations or personnel showers. The M2 Water Heater is shown in figure 4
on page 6.
It consists of three main components:
the fuel and ignition
system, the combustion system, and the control system. The systems consist
of removable panels, a control panel, a control box, a fuel-hose assembly,
an electrical power-cable assembly, a water-hose assembly, a boiler
assembly, a combustor assembly, two electrical motors, a magneto, a filter,
and tools.
Special Tools
The following special tools are required by the operator to maintain the
pump-unit assembly:
A universal spanner wrench
Two 15-inch adjustable wrenches
An 8-inch flat-tip screwdriver
A 9/16 by 5/8-inch double-head open-end wrench
A pair of retaining ring pliers
A V-belt tensiometer
A collapsible pail
A hand crank
A pull rope
A pair of slip-joint pliers, an eight-inch adjustable wrench, and a flat-tip
screwdriver are supplied with the M2 Water Heater.
5
Previous Page
