Figure 1-10.
Finger-crush ampoule marked No.4
l.
Step 12.
After one minute has passed, swing the hinged heater
assembly away from the test' spot (Figure 1-11).
m.
Step 13.
Hold the sampler vertically with the test spots down.
n.
Step 14.
Using heater pads, crush ampoules marked No. 5 (Figure
1-12).
Force the liquid from the two ampoules through
the formed channels to the test spots to ensure wetting.
Figure 1-11.
Swing Heater away from Test Spot
CM 1301
1-12
Previous Page
