Lesson 2/Practice Exercise
PRACTICE EXERCISE FOR LESSON 2
Instructions
You have just finished reading the instructional material for Lesson 2. This lesson covered the
operator preventive maintenance on the 50-GPM Pump. It is now time to check your
understanding of the lesson. This is done by completing the practice exercise below. All of the
questions are multiple-choice and are intended to measure your understanding of the procedure
used in performing the task. There is only one correct answer to each question. Try to answer all
of the questions without referring to the lesson material.
When you have completed all of the questions, turn the page and check your answers against the
correct responses. Each correct response is referenced to specific portions of the lesson material
so that you can review any questions you have missed or do not understand. When you have
completed your review, continue to the next lesson.
1. Which item to be inspected requires checking before and after operation of the 50-GPM
Pump?
a.
Appearance
b.
Hardware
c.
Suction valve
d.
Oil level
2. Which condition would be reported to organizational preventive maintenance?
a.
Oil level slightly low
b.
Pump not primed
c.
Faulty suction valve
d.
Fuel tank empty
3. You would use the gage rod to
a.
measure the water level.
b.
check the oil in the engine.
c.
inspect the fuel system.
d.
service the air cleaner.
23
Previous Page
