2.
Confidence Test.
After the self test, you must perform the confidence test next.
CAUTION
Nozzle protective cap assembly MUST BE stored on environmental cap when
not on the front of the CAM. DO NOT touch nozzle assembly or the new
filtered nozzle standoff; touching could contaminate them.
a. Remove the nozzle protective cap from the front of CAM and place the
protective cap onto the environmental cap, and twist clockwise (Figure 2-9).
Figure 2-9.
Removing Protective Cap
b. Place a filtered nozzle standoff onto the nozzle, without touching
the filter with your hands.
c. Remove confidence tester from carrying harness and perform H
confidence test first, by opening the H vapor shroud of confidence tester
(Figure 2-10).
CM 1301
2-12
Previous Page
