o. Hold sampler with test spots or arrow pointing down.
p. Use heater pads and crush the remaining two outside ampoules marked
No.
5 (Figure 1-21).
q. Rerub Lewisite Detecting Tablet.
r. Compare colors to determine safe or dangerous conditions.
Report
results to your supervisor.
Figure 1-21.
Crush Two Outside Ampoules Marked No.
5
4.
Procedure for Testing Without a Can or Box.
When no can or box is available, the normal sampler procedure is used with
one exception--you lay the sampler with the instruction side up on top of the
suspected area.
PART B - USE THE M256-SERIES CHEMICAL AGENT DETECTOR KIT
UNDER UNUSUAL CONDITIONS
1.
Temperatures Between +50 F (10 C) and +32 F (0 C).
When using the M256-Series Chemical Agent Detector Kit at temperatures
between +50€ F (10€ C) and +32€F (0€ C), wait at least six minutes after
finishing tests before comparing colors.
1-19
CM 1301
Previous Page
